Straight screw-in connection piece complete fitting For central lubrication units
Straight screw-in connector complete fitting
FITT-CLS-(SCREWIN-FITT)-SR-D6-M6X1KEG
Register now and access more than 125,000 products
- The screw-in threads are tapered and thus self-sealing
- The size of the screw-in thread depends on the lubrication point/manifold point
The straight screw-in connectors for 4-mm and 6-mm pipe diameters are suitable for use in the low-pressure range only.
Datasheets(X)
For connection of a line to a lubrication point or divider manifold point.
 | |
Suitable for hose external diameter | 6 mm |
Connection thread (d2) | M6 x 1 tapered |
Width across flats (SW) | 11 mm |
Width across flats 2 (SW2) | 12 mm |
Material | Steel |
Surface | Zinc plated yellow |
Last viewed
Eye bolt with full thread DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape LB
Needle for carbide scriber
Twist drill bit HSCo DIN 340 type RN OXIDE
1/2 inch diamond wet core drill bit
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
Furniture handle screw
Shoe accessories
Chipboard screw, countersunk head
Akura 44 profile half cylinder
Machine screw tap, through hole Ruko UNC DIN 2183 HSCo plain shape B