Straight screw-in connection piece complete fitting For central lubrication units
Straight screw-in connector complete fitting
FITT-CLS-(SCREWIN-FITT)-SR-D6-M8X1KEG
Register now and access more than 125,000 products
- The screw-in threads are tapered and thus self-sealing
- The size of the screw-in thread depends on the lubrication point/manifold point
The straight screw-in connectors for 4-mm and 6-mm pipe diameters are suitable for use in the low-pressure range only.
Datasheets(X)
For connection of a line to a lubrication point or divider manifold point.
 | |
Suitable for hose external diameter | 6 mm |
Connection thread (d2) | M8 x 1 tapered |
Width across flats (SW) | 11 mm |
Width across flats 2 (SW2) | 12 mm |
Material | Steel |
Surface | Zinc plated yellow |
Last viewed
Jacket Planam Highline
Nature S3 ESD safety shoes
Telescopic extension rod With safety device
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
System case 8.4.5
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
Bracket set for variable wooden rear wall DWD XP
Dust extraction drill bit Plus D
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with metallic sealing edge, shape B