Straight screw-in connection piece complete fitting For central lubrication units
Straight screw-in connector complete fitting
FITT-CLS-(SCREWIN-FITT)-SR-D6-R1/8INKEG
Register now and access more than 125,000 products
- The screw-in threads are tapered and thus self-sealing
- The size of the screw-in thread depends on the lubrication point/manifold point
The straight screw-in connectors for 4-mm and 6-mm pipe diameters are suitable for use in the low-pressure range only.
For connection of a line to a lubrication point or divider manifold point.
 | |
Suitable for hose external diameter | 6 mm |
Connection thread (d2) | R 1/8 inch tapered |
Width across flats (SW) | 11 mm |
Width across flats 2 (SW2) | 12 mm |
Material | Steel |
Surface | Zinc plated |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
W-SLB system storage box
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated
Fuel cell For DIGA® WO-1/21, WO-1/34 and Paslode Impulse IM 350
System case empty range 8.4.1 transparent
Twist drill bit HSCo DIN 338 type RN oxide
Centre drill bit, metal Ruko spotting drill HSS-G plain type N extra short
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with metallic sealing edge, shape B
Twist drill bit HSS DIN 338 type RN 130°
