Support clip, type BA
Support clip, type BA
SPRTCLIP-BA-NH4,5MM-(HDG)-M12
Register now and access more than 125,000 products
Type BA features a depression to secure the head of the hexagonal bolt while the nut is tightened.
Permissible tensile load
Values apply to a clamped connection (4 bolts), with loading in direction of screw axis.
Nperm = NR,d / γF (partial safety factor γF = 1.4).
Permissible transverse load
Values apply to a clamped connection (4 bolts) loaded at a right angle to the screw axis.
Vperm = VaR,d / γF (partial safety factor γF = 1.4).
With general technical approval Z-14.4-483
Datasheets(X)
CAD data (available after login)
With straight and angled flange ≤ 8°
Usable spacers: Type BH, BF1, BG1
 | |
Suitable for screw (d1) | M12 |
Distance from end of terminal 2 to the middle of the drill hole (c1) | 25.5 mm |
Distance from end of terminal to the middle of the drill hole (b1) | 15 mm |
Width (b2) | 28.5 mm |
Height (h1) | 7 mm |
Cam height (h2) | 4.5 mm |
Material | Spheroidal graphite iron |
RoHS-compliant | Yes |
Surface | Hot dip galvanized |
Tightening torque | 70 Nm |
Conditions for tightening torque | See approval |
Permissible tensile force when pulled straight | 18.86 kN |
Permissible transverse tensile force | 1.86 kN |
Type description | BA |
Other standard | WN 485-2 |
Last viewed
Multi-purpose grease construction/agriculture
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Turnbuckle, open form with welded ends DIN 1480, steel, zinc-plated, blue passivated (A2K)
Balcony sealing and uncoupling membrane CERAfix® 315
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 12.9, plain
Castellated nut, low profile with fine thread
Stretch X softshell jacket
Roofing screw OMG® DFHD-67 (XHD)
12 V/24 V vehicle adapter