Support clip, type BC
Support clip, type BC
SPRTCLIP-BC-RIM-(HDG)-M16
Register now and access more than 125,000 products
Features a depression to secure the head of the hexagonal bolt while the nut is tightened
The support clip is used for mounting at edges. It grips around the flange edges of profiles and supports.
Support clip is not suitable for transverse loads!
Recommended tensile load
Values apply to a clamped connection (4 bolts), with loading in direction of screw axis.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw (d1) | M16 |
Distance (c1) | 8 mm |
Min. grip width (c1) | 8 mm |
Distance from end of terminal to the middle of the drill hole (b1) | 17 mm |
Width (b2) | 41 mm |
Height (h1) | 9 mm |
Cam height (h2) | 9 mm |
Material | Spheroidal graphite iron |
RoHS-compliant | Yes |
Surface | Hot dip galvanized |
Tightening torque | 75 Nm |
Recommended tensile load | 30 kN |
Type description | BC |
Other standard | WN 485-2 |
Last viewed
Brad nail, type FN
Twist drill bit, metal Ruko DIN 338 HSS-R black oxidised
Work jacket
Work trousers
Counter nut, brass Metric according to EN 60423
4KS profile thumbturn cylinder
Sheet metal nut, type 10 Small threaded shank
Round head screw with square neck DIN 603, A2 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Guide rail For vertical installation box roller shutter systems with 25/25 mm slats