Support rail nut TM W.TEC® DUCTING CLAMP - lightweight series
DIN 3015-1 TM A4 stainless steel W.TEC series
NUT-SPRTRL-DIN3015-1-TM-W5-A4-SZ0-8
W.TEC
Register now and access more than 125,000 products
Nominal size according to DIN | 0-8 |
Thread type x nominal diameter (G) | M6 |
Length (L) | 25.5 mm |
Outer diameter (D2) | 12 mm |
Height (H1) | 14.5 mm |
DIN | 3015-1 |
Material | Stainless steel |
Surface | Plain |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
ISO insert holder with S clamping system for VB indexable inserts
Vehicle finishing disc
Anchor plate ASS 55
Safety shoe S1
pias® drilling screw, round head with collar and AW drive
Window construction screw, self-drilling, raised countersunk head, FEBOS®plus Steel, zinc-plated, blue passivated, AW drive
3/4 inch commercial vehicle pin wrench set front/rear axle 3 pieces
Divider assortment With compartment rails and compartment dividers for system dimensions 8.6
Hexagonal bolt with thread up to the head
Slotted countersunk head screw DIN 963, A4 stainless steel, plain
