Swivel hoist ring, CE
Swivel hoist ring, steel CE
SWIVHOIRG-CE-360G-0,6T-M10X19
Register now and access more than 125,000 products
- Safety factor 4 in all load directions
- Rotates 360° - 180° eyelet, self-adjusting, pivoting
- Ball bearings for easier load alignment
- Painted
Not suitable for rotating movement under load. With axial tension, a deviation of +/-5° with a reduction in load-bearing capacity by 10% is permitted.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M10 |
Surface | Lacquered |
Internal diameter (d2) | 30 mm |
Ring thickness (s1) | 12 mm |
Interior height (h2) | 44 mm |
Body height (h3) | 46 mm |
Height (h1) | 98 mm |
Width across flats (sw) | 37 mm |
Diameter of contact surface (d4) | 40 mm |
Thread length (l1) | 19 mm |
Material | Steel |
Max. torque | 10 Nm |
Product weight (per item) | 450 g |
Last viewed
Threaded rod with trapezoidal thread WN 976 with trapezoidal thread in accordance with DIN 103
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
Hole saw accessories Ruko 113217 carbide ejector pin
TIME-SERT® seat cutter
Precision screwdriver set TX 7 pieces
Hexagonal bolt with shank
Twist drill bit, metal Ruko DIN 338 UTL 3000 HSCo plain inch
Ballpoint pen Capri Unprinted
VDE screwdriver For hexagon drive
Sanding system dust-free sanding disc Useit® Superpad F