Swivel hoist ring, CE
Swivel hoist ring, steel CE
SWIVHOIRG-CE-360G-1,9T-M18X30
Register now and access more than 125,000 products
- Safety factor 4 in all load directions
- Rotates 360° - 180° eyelet, self-adjusting, pivoting
- Ball bearings for easier load alignment
- Painted
Not suitable for rotating movement under load. With axial tension, a deviation of +/-5° with a reduction in load-bearing capacity by 10% is permitted.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M18 |
Surface | Lacquered |
Internal diameter (d2) | 34 mm |
Ring thickness (s1) | 16 mm |
Interior height (h2) | 56.5 mm |
Body height (h3) | 64.5 mm |
Height (h1) | 134.5 mm |
Width across flats (sw) | 55 mm |
Diameter of contact surface (d4) | 59 mm |
Thread length (l1) | 30 mm |
Material | Steel |
Max. torque | 45 Nm |
Product weight (per item) | 1350.000 g |
Last viewed
Stud with threaded end ≈ 1 d DIN 938, steel 8.8, plain
Cheese head screw with hexagon socket head and shoulder ISO 7379, steel 12.9, plain, tolerance f9
Mechanic's glove Ansell Edge 48-125 48-126
Hexagonal bolt
Base plate for square-perforated panel system
HSCo end mill, long, centre-cutting DIN 844L
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Roll-in sliding block with guide bar
Cover Line
Manual taper tap Ruko hand tap HSS DIN 2181 UNF taper tap