Swivel hoist ring, CE
Swivel hoist ring, steel CE
SWIVHOIRG-CE-360G-2,5T-M20X38,1
Register now and access more than 125,000 products
- Safety factor 4 in all load directions
- Rotates 360° - 180° eyelet, self-adjusting, pivoting
- Ball bearings for easier load alignment
- Painted
Not suitable for rotating movement under load. With axial tension, a deviation of +/-5° with a reduction in load-bearing capacity by 10% is permitted.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M20 |
Surface | Lacquered |
Internal diameter (d2) | 40 mm |
Ring thickness (s1) | 20 mm |
Interior height (h2) | 67 mm |
Body height (h3) | 76 mm |
Height (h1) | 160 mm |
Width across flats (sw) | 65 mm |
Diameter of contact surface (d4) | 70 mm |
Thread length (l1) | 38.1 mm |
Material | Steel |
Max. torque | 100 Nm |
Product weight (per item) | 2300 g |
Last viewed
Low-cut safety shoes, S2
Half cylinder S5 locking system
Grid/net sanding disc Mirka Abranet Ace
Insert nut W-0385, steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
S1PL safety shoe New Balance Elite Lite
pias® wing-type drilling screw, flat countersunk head with AW drive
Low-cut safety shoes, S1P
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Concrete screw with female thread W-BS/S