Swivel joint For pneumatic tools
Pneumatic swivel joint 360°
SWIV-PN-ET-R1/4IN
Register now and access more than 125,000 products
High flexibility right at the pneumatic device makes use much easier
Can be bent to at least 180°
No bending of the connecting hose.
Can be rotated through 360°
Prevents the pneumatic hose from twisting.
A manometer can be connected directly to the swivel joint
Working pressure is measured right at the pneumatic tool.
Each connection leads to pressure losses. For this reason, a pneumatic system should only have as many connections as is really necessary. Insufficient operating pressure leads to performance losses.
Datasheets(X)
Pneumatic connection | 1/4 inch ET x 1/4 inch IT |
Flow capacity | 750 l/min |
Last viewed
O-ring, imperial NBR 70
Shim ring DIN 988, steel, plain
Raised contersunk head tapping screw, C shape with PH recessed head DIN 7983, A4 stainless steel, plain. With cross recess.
Brake calliper file Wide
Screw handle spatula
Rubber module, large
Bricklayers' trowel, forged Suitable even for the most demanding tasks, since handle and blade are forged from one piece
Thread cutter NES 3 For male thread 35-152 mm and 1 3/8-6 inch
Zinc clip-on wheel weight For car aluminium rims
Cartridge holder For 330 ml cartridge