System locking screw For plug-in connector
Locking screw steel zinc nickel pan head TX
LOKSCR-F.PLGCON-PANHD-TX20-M-4X20/12
Register now and access more than 125,000 products
Two connector plates can be secured against lifting through the use of self-tapping, locking system screws.
Datasheets(X)
To be used for connectors
 | |
Type description | M |
Nominal diameter | 4 mm |
Length | 20 mm |
Head type | Pan head |
Head diameter | 8 mm |
Head height | 3.1 mm |
Internal drive | TX20 |
Thread design | Partial thread |
Thread length | 12 mm |
Core diameter | 3.02 mm |
Material | Steel |
Surface | Zinc nickel |
Product weight (per item) | 2.200 g |
Last viewed
Stud bolts
Hammer drill bit Max Quadro-L Vario
Hexagon nut, inch
Glue spatula
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 10.9, plain
Lining tape
Hexagon socket screw-in nut, tapered thread DIN 906, steel, zinc-plated, blue passivated (A2K)
Washer, square, wedge-shaped for U sections
Cylindrical roller bearing FAG
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)