T-piece, reduced with solder connection EN1254, copper, 5130R
EN1254 copper 5130R
FITT-REDR-EN1254-ILE-CU-12X14X12/5130
Register now and access more than 125,000 products
- For universal use in various areas of application such as shipbuilding, mechanical engineering and equipment engineering
- Meets the requirements of various German technical regulations for gas installation (DVGW)
- Other certification institutes such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Suitability for drinking water is confirmed by the German technical regulations for gas installation (DVGW) type examination certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal connection fittings). This is also confirmed by the Austrian ÜA mark registration certificate no. R-15.2.3-20-17025 for 4000 series and R-15.2.3-20-17026 for 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and German technical regulations for gas installation DVGW G 600 (German Technical Rules for Gas Installations TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (technical rules oil installations TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating pipelines DIN 4747
- Thermal solar collectors
- Water-based room cooling systems
- Refrigeration equipment (ACR)
- Compressed air
- Equipment for the distribution of technical and medical gases
- Rainwater harvesting systems DIN 1989
- Fire-extinguishing pipes "wet" DIN 14462
- Sprinkler systems "wet" VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 12 mm |
Nominal diameter 2 | 14 mm |
Nominal diameter 3 | 12 mm |
Length (a) | 21 mm |
Length 2 (b) | 19 mm |
Length 3 (c) | 21 mm |
Length 4 (Z/Za) | 12 mm |
Length 5 (Zb) | 8 mm |
Length 6 (Zc) | 12 mm |
Width across flats (S/S1) | 0 - not applicable |
Width across flats 2 (S2) | 0 - not applicable |
Material | Copper |
Surface | Plain |
Last viewed
Cover plate DIN 3015-2, double version (DP-S), W.TEC series
Sandpaper triangle Useit® Superpad, wood
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon head bolt with shank and fine thread ISO 8765, steel 8.8, zinc flake, silver (ZFSHL)
Twist drill bit HSCo DIN 338 MFD Speed
Countersunk rivet
Conical countersink assortment Ruko ULTIMATECUT conical countersink set DIN 335 HSCo, 6 pcs.
Hexagonal nut
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Torque tester Stahlwille TORSIOMETER 7750