T-piece, with solder connection on all sides EN1254, copper, 5130
EN1254 copper 5130
FITT-REDUZ-1254-ILE-CU108X108X108/5130
Register now and access more than 125,000 products
- For universal use in various areas of application, e.g. shipbuilding and the mechanical engineering industry
- Meets the requirements of the various German Technical and Scientific Association for Gas and Water (DVGW) regulations
- Also approved by other certification institutes such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Fitness for drinking water is confirmed by the DVGW type examination certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal adapter fittings). This is also confirmed by the Austrian conformity registration certificate no. R-15.2.3-20-17025 for the 4000 series and R-15.2.3-20-17026 for the 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations German Technical LPG Rules (TRF)
- Heating oil utilities DIN 4755 (German Technical Rules for the Installation of Oil Burning Systems – TRÖ)
- Hot water heating systems DIN EN 12828
- Local and district heating pipelines, DIN 4747
- Thermal solar collectors
- Water-circulation-based room cooling equipment
- Air Conditioning and Refrigeration (ACR)
- Compressed air
- Systems for distributing technical and medical gases
- Rainwater harvesting systems, DIN 1989
- Extinguishing lines, “wet” DIN 14462
- Sprinkler systems “wet” VdS CEA 4001
- Industrial and process water
- Sewage lifting plants
 | |
Nominal diameter | 108 mm |
Nominal diameter 2 | 108 mm |
Nominal diameter 3 | 108 mm |
Length (a) | 107 mm |
Length 2 (b) | 107 mm |
Length 4 (Z/Za) | 60 mm |
Length 5 (Zb) | 60 mm |
Connection type | 1. connection internal soldering, 2. connection internal soldering, 3. connection internal soldering |
Width across flats (S/S1) | 0 - not applicable |
Width across flats 2 (S2) | 0 - not applicable |
Material | Copper |
Surface | Plain |
Standards | DIN 1254 |
Last viewed
Cable passage in two parts
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-plated, blue passivated (A2K)
Knife pouch
Supplement set for table frame TMQ70/3
Sanding belt, fabric VSM XK885Y
90° angled adjustable sealing cone fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
Hexagon tapping screw, shape C ISO 1479 A2 stainless steel, plain
Side impact screwdriver holder For workshop trolleys
NP profile thumbturn cylinder In 6-pin system
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A