T-shaped cutting ring fitting ISO 8434-1, zinc-nickel-plated steel
T-cutting ring fitting steel
TUBFITT-ISO8434-L-TC-ST-D6-M12X1,5
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M12 x 1.5 |
Thread type 2 x nominal diameter 2 x pitch 2 (T2) | M12 x 1.5 |
ISO | 8434 |
Nominal pressure PN | 500 |
Pipe diameter (D1) | 6 mm |
Diameter 2 (D2) | 4 mm |
Width across flats (S1) | 12 mm |
Width across flats 2 (S2) | 14 mm |
Material | Steel |
Surface | Zinc nickel |
Length (L1) | 27 mm |
Length 2 (L2) | 19 mm |
Length 3 (L3) | 12 mm |
Last viewed
Ducting clamp DIN3015-1, lightweight series, smooth inner surface, W.TEC series
Round brush LM For solvent-based paints
Milling bit Ruko tungsten carbide milling bit type C rounded roller (WRC) plain
Safety sandals, S1
Adjusting ring, type A
Cylindrical roller bearing FAG
Threaded fitting
Double cylinder S5 locking system
Hexagon Socket Head Cap Screw
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural