T-shaped push-in fitting
T-shaped push-in fitting M/G thread
PSHINFITT-T-ROT-PLA-ET-G1/4-PIP-4
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Design | 360° rotatable |
Form | T |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | G1/4 |
Suitable for hose external diameter (Fs) | 4 mm |
Length (l1) | 21.5 mm |
Thread length (lg) | 6.5 mm |
Length 3 (l3) | 14.9 mm |
Length 2 (l2) | 36 mm |
Width across flats (s1) | 10 mm |
Last viewed
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Compact Fendt workshop trolley
Roll-off unit, 1x For vehicle protective films, with protective covers
T-piece with female thread and male thread
Floor nozzle For cleaning large areas of carpet with the spray extraction device
Screw, hexagon head with washer inch
1/2 inch socket wrench insert metric, hexagon, long
D-S-H/R3R post support bracket
Foam adapter, multi-hole
Hexagonal bolt with thread up to head ISO 4017, steel strength class 8.8, zinc-nickel-plated, silver (ZNSHL)