T-shaped push-in fitting
T-shaped push-in fitting R thread
PSHINFITT-T-ROT-PLA-ET-R1/2-PIP-10
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Design | 360° rotatable |
Form | T |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | R1/2 |
Suitable for hose external diameter (Fs) | 10 mm |
Length (l1) | 37.1 mm |
Thread length (lg) | 13.5 mm |
Length 3 (l3) | 21 mm |
Length 2 (l2) | 53.8 mm |
Width across flats (s1) | 21 mm |
Last viewed
Pan head tapping screw, shape C with Z recessed head DIN 7981, A2 stainless steel, plain, PZ drive, shape C
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, plain
LED electronic engine compartment hand-held lamp
T-piece, reduced with solder connection EN1254, copper, 5130R
Welded stud
Screw, hexagon head with pin/point
Ribbed PVC plaster tape
Hercules S3 safety boots
Hexagonal bolt with pin and small hexagon
Low-cut safety shoes, S3