T-shaped push-in fitting
T-shaped push-in fitting R thread
PSHINFITT-T-ROT-PLA-ET-R1/4-PIP-4
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Design | 360° rotatable, T-connector |
Form | T |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | R1/4 |
Suitable for hose external diameter (Fs) | 4 mm |
Length (l1) | 25.5 mm |
Thread length (lg) | 9.5 mm |
Length 3 (l3) | 14.9 mm |
Length 2 (l2) | 36.0 mm |
Width across flats (s1) | 14 mm |
Last viewed
Interior trim clip, type 2
ASSY® 4 A2 CSMP timber screw A2 stainless steel plain partial thread countersunk milling pocket head
TX bit with hole
Flat head screw with hexalobular drive
Colour – blind rivets Round pan head
Cut protection glove Ejendals TEGERA® 516
Stone and façade sealant
Repair hose line, NBR/CR With medium permeation for non-fuel-carrying applications
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Ducting clamp DIN3015-2, heavy-duty series, ribbed inner surface, W.TEC series