T-shaped push-in fitting, long version
T-shaped push-in fitting long version M/G thread
PSHINFITT-T/LS-ROT-PLA-ET-G1/2-PIP-8
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic |
Material of gasket | Nitrile butadiene rubber (NBR) |
Surface of the screwing thread | Nickel plated |
Design | T-connector |
Form | L |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | G1/2 |
Suitable for hose external diameter (Fs) | 8 mm |
Length (l1) | 47.2 mm |
Thread length (lg) | 9.0 mm |
Length 3 (l3) | 18.3 mm |
Length 2 (l2) | 22.7 mm |
Width across flats (s1) | 14 mm |
Last viewed
Work jacket
Button-head rivet
E90 fire protection duct outer corner
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Regulator with manometer For CA preparation unit size 2
EPS profile double cylinder
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Mounting set M12
Straight reducer fitting ISO 8434-1, stainless steel 1.4571