T-shaped push-in fitting with female thread
T-shaped push-in fitting female thread
PSHINFITT-T-ROT-PLA-IT-G1/8-PIP-6
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Design | 360° rotatable, T-connector |
Form | T |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | G1/8 |
Suitable for hose external diameter (Fs) | 8 mm |
Length (l1) | 27.3 mm |
Thread length (lg) | 7 mm |
Length 3 (l3) | 18 mm |
Length 2 (l2) | 44.9 mm |
Width across flats (s1) | 14 mm |
Internal drive (s1) | 0 - not applicable |
Last viewed
Hexagonal bolt with flange DIN 6921, steel 8.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSCo DIN 338 MFD Speed
Anchor rod sold by the meter zinc-plated steel
Deep groove ball bearing FAG
VDE precision screwdriver, flat slotted
Engine oil TRIATHLON® Endurance III 5W-30
Heavy Duty non-slip floor marking adhesive tape
Lock washer type S A2 stainless steel
T-piece branch pipe, reduced EN10242 B1, hot-dip galvanised malleable iron
O-ring, metric