TIG welding rod for stainless steel welding
TIG welding rod for stainless steel welding
WELDROD-TIG-1.4430-1,6MMX1M
Register now and access more than 125,000 products
- SG X2 CrNiMo 1912, DIN 8556
- Designation in accordance with AWS A 5.9: ER 316 L-Si
- Material number 1.4430
Welding rods are welded with DC pole.
Datasheets(X)
Suitable for welded joints on the following basic materials:
1.4301, 1.4306, 1.4401, 1.4404, 1.4408, 1.4435, 1.4436, 1.4541, 1.4550, 1.4552, 1.4571, 1.4573, 1.4580, 1.4581, 1.4583
Wire diameter | 1.6 mm |
Length | 1000 mm |
Weight | 5 kg |
Material designation | SG X2 CrNiMo 1912 |
Material | Stainless steel, 1.4430, X2CrNiMo19-13 |
Composition of the solder component (weight %) of C | 0.025 % |
Min. elasticity limit (Rp 0.2 value) | 350 N/mm² |
Shielding gas | Argon |
Min./max. tensile strength | 600-700 N/mm² |
Min. breaking elongation | 30 % |
Last viewed
Shaft protection GPN 290 Polyethylene (PE-LD), yellow
ZD 3 handle hole
Pan head tapping screws with recessed head ISO 7049, A2-70 stainless steel, plain
MS 5000 disconnect pin For turning knob
Backplate for tension anchors, two pieces
ORSYmat
Cable grip with loop and swivel
Compact workshop trolley
AL 20 short plate pair
Chipboard screw, pan head