TIME-SERT® threaded bushing
Insert nut Time-Sert
NUT-INRT-M16X2X24
TIME-SERT
Register now and access more than 125,000 products
Safe working, including on weak walls
Very thin-walled owing to synchronously running threads.
Can be used in thin-walled materials
Reliable repairs where only a few thread turns are available.
Impermeable to media
Pressure application with the workpiece makes the thread pressure-sealed for water, oil, other liquids and compressed gases.
Self-locking
Automatic shaping of not yet fully formed threads when screwing in. The nut is guaranteed not to twist out, even without bonding.
Accurate positioning in the workpiece
The nuts have a collar, no additional securing in the workpiece is necessary
Tear-out strength
Tear-out strength may vary subject to application (edge areas etc.) and material. As a result, no general information can be provided on this topic. Tests in the Würth laboratory have shown that the Time-Sert thread repairs are equivalent to the original threads in most cases.
Steel nuts
Material: 9SMn/Pb28K DIN1651/668
Coating: galvanised, passivated.
Datasheets(X)
Thread type x nominal diameter x pitch (My) | M16 x 2 |
Length (L) | 24 mm |
Design | Metric nominal thread |
Surface | Zinc plated |
Material | Steel |
Last viewed
Work dungarees
Safety boots, S3
Twist drill bit, metal Ruko DIN 338 HSS-R black oxidised
Double-sided protective tape Duoband
Knife blade, straight, toothed
Knife blade Martor polystyrene blade no. 179
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Straight pin, unhardened DIN 7, A1 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
90° HSCo WN type RN TiAlN NC spotting drill bit