TIPP® fixed point attachment With galvanised pipe clamps and spacer pipe
Fixed point attachment TIPP steel zinc plated
FIXPTCLMP-64MM
TIPP
Register now and access more than 125,000 products
Structure-borne sound insulation according to DIN 4109 via EPDM rubber strip
Quick and simple installation on Varifix brackets and C-mounting rails
Side mounting holes
Cradle to Cradle®-certified
- Upgrading the building using non-hazardous materials
- Wider range of applications for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Our products certified as Cradle to Cradle Certified® are resource-conserving and environmentally compatible. The standard assesses the safety, recyclability and pollutant content of materials in the final product. The focus here is on conserving resources, for example, by using recycled material in the manufacturing process.
Datasheets(X)
For wall and ceiling attachment.
Attachment on C-assembly rails or brackets via combination sliding nut, U washer and hexagonal bolt M10. Direct attachment to wall or ceiling with e.g. screw anchor W-SA or fixing bolt anchor W-FAZ/S M10. Elevation of fixed-point brackets achieved using threaded rods.
 | |
Diameter (ØD) | 64 mm |
Diameter tubular stiffener (ØDH) | 33.7 mm |
Tube axis dimension (RA) | 142 mm |
Bottom of pipe (RS) | 110 mm |
Length (L1) | 148 mm |
Width (B) | 100 mm |
Length 2 (L2) | 60 mm |
Material thickness (t) | 6 mm |
Metal-band width (BM) | 30 mm |
Metal belt thickness (tM) | 2.5 mm |
Elongated hole width (LB) | 11 mm |
Elongated hole length (LL) | 11 mm |
Hole distance (LA) | 78 mm |
Permissible horizontal load (FX) | 4 kN |
Permissible vertical load (FY) | 4 kN |
Surface | Zinc plated |
Permissible load | 4 kN |
Material | Structural steel, 1.0037 |
Product weight (per item) | 2090 g |
Sustainability | Resources |
Last viewed
Welder clothing
Adapter profile 30 SR For single-leaf hold-open devices (ERA)
Balcony door handle, type B For private living areas
Low-cut safety shoes, S1
Hexagon head bolt with full thread for pressure container construction (PED) ISO 4017, steel 25CrMo4, zinc-plated
Twist drill bit HSCo DIN 338 type RN oxide
Hexagonal bolt with threading up to head
System drawer cabinet 16.8: 1037x770 mm
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Vent and bird screen mesh