TIPP® fixed point attachment With galvanised pipe clamps and threaded rods
Fixed point clamp type 116
FIXPTCLMP-TYPE116-LA-GW-(ZN)-57,0
Register now and access more than 125,000 products
- Structure-borne sound insulation according to DIN 4109 via EPDM rubber strip
- Quick and simple installation on Varifix brackets and C mounting rails
- Side mounting holes
Datasheets(X)
CAD data (available after login)
For wall and ceiling attachment.
Attachment on C-assembly rails or brackets via combination sliding nut, U washer and hexagonal bolt M10. Direct attachment to wall or ceiling with e.g. screw anchor W-SA or fixing bolt anchor W-FAZ/S M10. Elevation of fixed-point brackets achieved using threaded rods.
 | |
Diameter (ØD) | 57 mm |
Diameter tubular stiffener (ØDH) | 12 mm |
Tube axis dimension (RA) | 184 mm |
Bottom of pipe (RS) | 155 mm |
Length (L1) | 143 mm |
Width (B) | 100 mm |
Length 2 (L2) | 60 mm |
Material thickness (t) | 5 mm |
Metal-band width (BM) | 30 mm |
Metal belt thickness (tM) | 2.5 mm |
Elongated hole width (LB) | 11 mm |
Elongated hole length (LL) | 16.5 mm |
Hole distance (LA) | 78 mm |
Surface | Zinc plated |
Material | Steel |
Product weight (per item) | 2200.000 g |
Last viewed
Adjustable T-shaped sealing cone fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
EPS profile thumbturn cylinder
G-fuse 5x20
Hexagonal nut, imperial
Washer For ASSY 4 WH II and ASSY 3.0 SKII screws
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
C4 workshop trolley top unit With four drawers for Compact workshop trolleys
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HB shank
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, zinc flake, silver (ZFSHL)