TIPP® fixed point attachment with galvanised pipe clamps and threaded rods
FIXPTCLMP-TYPE116-LA-GW-(ZN)-42,4
Art.-no. 0862973042
EAN 4047376049451
Register now and access more than 125,000 products
- Structure-borne sound insulation according to DIN 4109 via EPDM rubber strip
- Quick and simple installation on Varifix brackets and C mounting rails
- Side mounting holes
Datasheets(X)
For wall and ceiling attachment.
Attachment on C-assembly rails or brackets via combination sliding nut, U washer and hexagonal bolt M10. Direct attachment to wall or ceiling with e.g. screw anchor W-SA or fixing bolt anchor W-FAZ/S M10. Elevation of fixed-point brackets achieved using threaded rods.
 | |
Diameter (ØD) | 42.5 mm |
Diameter tubular stiffener (ØDH) | 12 mm |
Tube axis dimension (RA) | 176 mm |
Width (B) | 100 mm |
Material thickness (t) | 5 mm |
Metal-band width (BM) | 30 mm |
Metal belt thickness (tM) | 2.5 mm |
Surface | Zinc plated |
Material | Steel |
Product weight (per item) | 1800.000 g |
Last viewed
Cold neck guard Centurion S50NBFCSP
Plus Quadro-L Vario hammer drill bit
Flat brush LM light For solvent-based paints
M press jaw
Stainless steel surface finishing manual
Bit RW E 6.3 (1/4 inch) Impact
Hexagon nut with clamping piece (non-metal insert) ISO 7040, 10 steel with silver zinc-flake coating (ZFSHL)
Hexagon nut with flange EN 1661, steel, strength class 10, zinc flake, silver (ZFSHL)
Bit RW E 6.3 (1/4 inch) Impact
Flat washer without chamfer ISO 7089 steel 300 HV, zinc flake silver