TIPP® robust pipe clamp, hot-dip galvanised
Pipe clamp TIPP robust HDG
PIPCLMP-ROBUST-(HDG)-M10/12-(124-129MM)
Register now and access more than 125,000 products
- Thanks to the two screw-in nuts, further opening of the pipe clamp is possible, which makes the insertion of the pipe quick and easy, especially for overhead mounting
- Pre-assembled rubber inlay ensures optimal slip protection
- Screw-in nut with plastic locking device, which prevents it from falling out
Datasheets(X)
For maximum load-bearing capacity in plumbing installations, in heating system construction, plant construction and pipeline construction, especially in outdoor areas or industrial halls
 | |
Min./max. grip range (ØD) | 124-129 mm |
Length (L) | 183 mm |
Connection thread (G) | M10 x M12 |
Metal-band width (BM) | 30 mm |
Metal belt thickness (tM) | 3.0 mm |
Permissible load | 3 kN |
Material | Steel |
Min./max. temperature resistance | -30 to 100 °C |
Weight | 449 g |
Ultraviolet resistance | Yes |
Halogen-free | Yes |
Resistance against | Diluted acids and lyes |
Chlorine-free | Yes |
Silicone-free | Yes |
Surface | Hot dip galvanized |
Thread type | Metric thread |
Building material class | B2 - Normally inflammable |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 A2 stainless steel
Flat washer - extra-large series ISO 7094 steel 100 HV, hot-dip galvanised
GPN 280 end cap Polyethylene (PE-LD), black
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Twist drill bit HSS DIN 340 type RN 130°
HSCo Multi Performance combination tap
Grooved taper-pin ISO 8744 steel plain
Hand Sanding Blocks with Extraction
Pocket knife
EPS profile double cylinder