TIPP® robust pipe clamp, hot-dip galvanised
Pipe clamp TIPP robust HDG
PIPCLMP-ROBUST-(HDG)-M10/12-(131-137MM)
Register now and access more than 125,000 products
- Thanks to the two screw-in nuts, further opening of the pipe clamp is possible, which makes the insertion of the pipe quick and easy, especially for overhead mounting
- Pre-assembled rubber inlay ensures optimal slip protection
- Screw-in nut with plastic locking device, which prevents it from falling out
Datasheets(X)
For maximum load-bearing capacity in plumbing installations, in heating system construction, plant construction and pipeline construction, especially in outdoor areas or industrial halls
 | |
Min./max. grip range (ØD) | 131-137 mm |
Length (L) | 191 mm |
Connection thread (G) | M10 x M12 |
Metal-band width (BM) | 30 mm |
Metal belt thickness (tM) | 3.0 mm |
Permissible load | 3 kN |
Material | Steel |
Min./max. temperature resistance | -30 to 100 °C |
Weight | 474 g |
Ultraviolet resistance | Yes |
Halogen-free | Yes |
Resistance against | Diluted acids and lyes |
Chlorine-free | Yes |
Silicone-free | Yes |
Surface | Hot dip galvanized |
Thread type | Metric thread |
Building material class | B2 - Normally inflammable |
Last viewed
Low-cut safety shoes, S3
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Threaded rod DIN 976, A2-70 stainless steel, shape A
PVC single core H05/H07V-K, fine wire
Tungsten carbide bur with aluminium teeth
Hexagonal bolt with thread up to the head
Work dungarees
AL 900 door handle on inner plate With CK punch
Shim ring For Standard clamping element
Shelf For shop floor board