TIPP® robust pipe clamp, hot-dip galvanised
Pipe clamp TIPP robust HDG
PIPCLMP-ROBUST-(HDG)-M10/12-(175-185MM)
Register now and access more than 125,000 products
- Thanks to the two screw-in nuts, further opening of the pipe clamp is possible, which makes the insertion of the pipe quick and easy, especially for overhead mounting
- Pre-assembled rubber inlay ensures optimal slip protection
- Screw-in nut with plastic locking device, which prevents it from falling out
Datasheets(X)
For maximum load-bearing capacity in plumbing installations, in heating system construction, plant construction and pipeline construction, especially in outdoor areas or industrial halls
 | |
Min./max. grip range (ØD) | 175-185 mm |
Length (L) | 240 mm |
Connection thread (G) | M10 x M12 |
Metal-band width (BM) | 30 mm |
Metal belt thickness (tM) | 3 mm |
Permissible load | 3 kN |
Material | Steel |
Min./max. temperature resistance | -30 to 100 °C |
Weight | 593 g |
Ultraviolet resistance | Yes |
Halogen-free | Yes |
Resistance against | Alcohol |
Chlorine-free | Yes |
Silicone-free | Yes |
Surface | Hot dip galvanized |
Thread type | Metric thread |
Building material class | B2 - Normally inflammable |
Last viewed
Low-cut safety shoes, S1
CERALINE matting body
Threaded fitting
Structure for workstation with lighting
Safety sandals, S1
Cable ties with plastic latch, heat-stabilised – industrial quality
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Work trousers
Protective cap for pressure screw For quick-action clamps
Dunlop Purofort Plus Full Safety S5 rubber safety boots