TIPP® robust pipe clamp, hot-dip galvanised
Pipe clamp TIPP robust HDG
PIPCLMP-ROBUST-(HDG)-M10/12-(65-73MM)
Register now and access more than 125,000 products
- Thanks to the two screw-in nuts, further opening of the pipe clamp is possible, which makes the insertion of the pipe quick and easy, especially for overhead mounting
- Pre-assembled rubber inlay ensures optimal slip protection
- Screw-in nut with plastic locking device, which prevents it from falling out
Datasheets(X)
For maximum load-bearing capacity in plumbing installations, in heating system construction, plant construction and pipeline construction, especially in outdoor areas or industrial halls
 | |
Min./max. grip range (ØD) | 65-73 mm |
Length (L) | 125 mm |
Connection thread (G) | M10 x M12 |
Metal-band width (BM) | 25 mm |
Metal belt thickness (tM) | 2.5 mm |
Permissible load | 2 kN |
Material | Steel |
Min./max. temperature resistance | -30 to 100 °C |
Weight | 198 g |
Ultraviolet resistance | Yes |
Halogen-free | Yes |
Resistance against | Alcoholic solutions |
Chlorine-free | Yes |
Silicone-free | Yes |
Surface | Hot dip galvanized |
Thread type | Metric thread |
Building material class | B2 - Normally inflammable |
Last viewed
Document folder
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
STC+ end mill Turbo-Twister-Uni, five-cutter, unequal twist gradient, 2xD
Multi-purpose drill bit MFD-S Plus
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Taper-grooved dowel pin DIN 1472, A1 stainless steel, plain
Jacket Planam Highline
STAMCOLL AS adhesive and sealant For bonding Stamisol overlaps and connecting to roofs and façades
Suction hose Mirka MPA0412
Particle filter P3 for half face mask HM 173