Table hinge
Cabinet flap hinge
CABHNGE-FLAPH-WIDE-ST-(ZN)-BLUE-120X33
Register now and access more than 125,000 products
For mounting up to A = 100 mm for example, you can use ASSY countersunk screws with 3 mm diameter, up to A = 160 mm, you can use ASSY countersunk screws with 3.5 mm diameter.
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
 | |
Material | Steel |
Length (A) | 120 mm |
Width (B) | 33 mm |
Roll diameter (R) | 7 mm |
Material thickness (M) | 1.4 mm |
Surface | Zinc plated |
Standards | DIN 7957 |
Last viewed
Type Q staples
Straight bulkhead fitting ISO 8434-1, zinc-nickel-plated steel
Small screwdriver slotted with pocket clip
Hexagonal bolt with shaft, SB fittings, DIN EN 15048-1 ISO 4014, A4-70 stainless steel, plain, with nut ISO 4032
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Hexagon nut, inch
Castellated nut DIN 935, steel 8, zinc-plated, blue passivated (A2K)
Softshell jacket One
Work dungarees
Natural stone sealant 4 in 1