Table hinge
Cabinet flap hinge
CABHNGE-FLAPHI-WIDE-ST-(ZN)-BLUE-80X28MM
Register now and access more than 125,000 products
For mounting up to A = 100 mm for example, you can use ASSY countersunk screws with 3 mm diameter, up to A = 160 mm, you can use ASSY countersunk screws with 3.5 mm diameter.
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
 | |
Material | Steel |
Length (A) | 80 mm |
Width (B) | 28 mm |
Roll diameter (R) | 6.2 mm |
Material thickness (M) | 1.2 mm |
Surface | Zinc plated |
Standards | DIN 7957 |
Last viewed
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
EPS profile thumbturn cylinder
Façade membrane STAMISOL PERFORM FI 2 TAPE
Hexagonal bolt with flange EN 1665, steel 8.8, zinc-nickel, silver (ZNSHL)
Lid For storage boxes in sizes 2/3/4
Spacer stud, polyamide, hex, F/M
Atlantis S3 safety boots
Metal core drill bit Ruko HSS TiAlN Weldon holder
Round pan rivets