Table leg
Table leg diameter 50 mm
TBLLEG-ST-(CR)-POL-D50-(1015-1195MM)
Register now and access more than 125,000 products
- Cover sleeve, continuous appearance remains after adjusting the height
- Quick final assembly or disassembly of the table legs for transport purposes, by disconnecting the legs from the mounting plate
- Large mounting plate made from cast aluminium
- Can also be installed on two table panels
- Table legs are polished before finishing
Flange connection between the mounting plate and table leg
- Friction-type positive connection
- Final assembly without having to rotate the table legs
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
 | |
Material | Steel |
Surface | Chrome plated |
Gloss level | Polished |
Diameter (Ø) | 50 mm |
Min./max. height | 1015-1195 mm |
Load capacity | 300 kg |
Last viewed
1/4-inch socket wrench insert For TX screws
Colour – blind rivets Round pan head
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
Hexagonal bolt
Position screw for ISO D clamping system
VS SUB SIDE diagonal cupboard pull-out
Divider assortment With system boxes for system dimensions 8.6
Safety boots, S3
Banjo bolt DIN 7643, steel, zinc-nickel silver-plated (ZNSHL), short version
Jacket Planam Highline