Table leg with castor
Table leg with foot roller
TBLLEG-ROLL-ST-A2/FINISH-D60-(650-750)
Register now and access more than 125,000 products
- Quick final assembly or disassembly of the table legs for transport purposes, by disconnecting the legs from the mounting plate
- Large mounting plate made of cast aluminium, can also be installed on two table panels
- Steel cover sleeve, continuous appearance remains after adjusting the height
- Table legs are polished before finishing
Flange connection between the mounting plate and table leg
- Friction-type positive connection
- Final assembly without having to rotate the table legs
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
 | |
Material | Steel |
Surface structure | Brushed |
Colour | Stainless steel coloured |
Diameter (Ø) | 60 mm |
Min./max. height | 650-750 mm |
Load capacity | 100 kg |
Last viewed
Cable grommet PVC
Protective glove, winter
Wire brush Klingspor BH 600
Cylindrical pin with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper), tolerance m6
Shim ring DIN 988, steel, plain
Twist drill bit, metal Ruko DIN1897 HSCo TiAlN
Hexagonal bolt with thread up to the head
K Plus insulation pipe clamp With separate insulation part
Safety boots, S3
Low-cut safety shoes, S1