Tap wrench Ruko DIN 1814 adjustable
Tap wrench DIN 1814 adjustable Ruko
TAPWRNCH-RUKO-241103-ZNDIECASTINGM5-M20
Art.-no. 1971005620
EAN 4007140025746
Register now and access more than 125,000 products
With two-jaw collet chuck for clamping square shanks. With steel handles, one of which can be unscrewed.
Design:
- Die-cast zinc housing.
- Clamping jaws: hardened
Length | 370 mm |
Material | Die-cast zinc |
DIN | 1814 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Work dungarees Kübler Image Dress New Design 3347 3411
Square wedge-shaped washer DIN 434, steel, plain, for U section
Hexagonal bolt with flange in accordance with MBN standard
Adhesive-free Elast plaster, latex-free for all wounds and cuts
Grooved taper-pin ISO 8744 steel plain
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with metallic sealing edge, shape B
Work polo shirt Stretch X
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Hexagonal bolt with thread up to the head ISO 4017, zinc plated 10.9 steel with thick-layer passivation (VZD)
Protective glove Dastex 3015T1 Fabric
