Tap wrench Ruko DIN 1814 adjustable
Tap wrench DIN 1814 adjustable Ruko
TAPWRNCH-RUKO-241104-M11-M27
Register now and access more than 125,000 products
With two-jaw collet chuck for clamping square shanks. With steel handles, one of which can be unscrewed.
Design:
- Die-cast zinc housing.
- Clamping jaws: hardened
Datasheets(X)
Size | 0 - not applicable |
Length | 480 mm |
Suitable for | 0 - not applicable |
Material | Die-cast zinc |
DIN | 1814 |
Last viewed
TX insert bit
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Wood screw Hexagon head DIN 571, A2 stainless steel
Hexagonal bolt with shank and fine thread
Conical countersink HSS Ruko DIN 335 plain form C
Concrete ballast weight For light dome system and demarcation
Hose connection with plug-in nipple Series 2000
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Work shirt
Countersunk tapping screw, shape C with slot DIN 7972, steel, zinc-plated (A2K)