Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
DIN 7978 plain unhardened steel
PIN-TAP-DIN7978-UNHDND-A-12X28
Register now and access more than 125,000 products
DIN 7978 was withdrawn and superseded by DIN EN ISO 8736 (some other nominal lengths changed).
Datasheets(X)
 | |
Nominal diameter (d1) | 12 mm |
Length (l1) | 28 mm |
Connection thread (D) | M6 |
Thread length (metric thread) (t1) | 10 mm |
Hole depth (t2) | 16 mm |
Standards | DIN 7978 |
Form | A |
Material | Steel |
Surface | Plain |
Design | Ground, Unhardened |
RoHS-compliant | Yes |
Last viewed
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated
RW® bit
SB 20 E sliding door fitting guide rail
Hexagonal bolt with thread up to the head ISO 4017, brass, nickel-plated
System insert 8.4.1, combination wrench
Twist drill bit HSCo DIN 338 MFD Speed
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
90° elbow, with solder connection on both sides EN1254, copper, 5002A
Jamo plus 4 CSMP screw for adjustable distance mounting Steel zinc-plated partial thread with underhead thread for adjusting the countersunk head with milling pockets
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive