Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
DIN 7978 plain unhardened steel
PIN-TAP-DIN7978-UNHDND-A-14X45
Register now and access more than 125,000 products
DIN 7978 was withdrawn and superseded by DIN EN ISO 8736 (some other nominal lengths changed).
Datasheets(X)
 | |
Nominal diameter (d1) | 14 mm |
Length (l1) | 45 mm |
Connection thread (D) | M8 |
Thread length (metric thread) (t1) | 12 mm |
Hole depth (t2) | 20 mm |
Standards | DIN 7978 |
Form | A |
Material | Steel |
Surface | Plain |
Design | Ground, Unhardened |
RoHS-compliant | Yes |
Last viewed
Safety sandals, S1P
Hexagon nut, low profile with fine thread DIN 439, steel 4, plain
Hexagonal bolt with thread up to the head
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
Basic trousers
RED PERFECT® 3D non-woven lamella flap disc for direct use on angle grinders
90° angled cutting ring fitting ISO 8434-1, stainless steel 1.4571
Hoodie Z266
Slotted countersunk head screw DIN 963, brass, plain
Vulcanised fibre disc Klingspor CS 561