Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
DIN 7978 plain unhardened steel
PIN-TAP-DIN7978-UNHDND-A-8X36
Register now and access more than 125,000 products
DIN 7978 was withdrawn and superseded by DIN EN ISO 8736 (some other nominal lengths changed).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 8 mm |
Length (l1) | 36 mm |
Connection thread (D) | M5 |
Thread length (metric thread) (t1) | 8 mm |
Hole depth (t2) | 12 mm |
Standards | DIN 7978 |
Form | A |
Material | Steel |
Surface | Plain |
Design | Ground |
RoHS-compliant | Yes |
Last viewed
Paint spray, high gloss
C 6.3 TX bit (1/4 inch)
Designer furniture handle MG-ZD 42
Workshop scheduler, two rows DIN A4
Presentation folder Martor 900852
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Slotted flat-head screws with large head DIN 921, A1 stainless steel, plain
Slotted cylinder head screw ISO 1207, A4-70 stainless steel, plain
Refuse bag Without pull tie
Door closer GTS 601 with slide rail