Tapered roller bearing FAG
Tapered roller bearings
TAPERED-ROLLBEAR-32007-XDY-XL
Register now and access more than 125,000 products
The tapered roller bearing can support high radial and axial loads in a single direction. Not self-retaining.
The counter-alignment needed by the bearing is typically implemented using a second, mirrored tapered roller bearing.
Datasheets(X)
- A:modified inner structure
- B:enlarged contact angle
- X:external dimensions in accordance with international standards
 | |
Internal diameter (d) | 35 mm |
Outer diameter (D) | 62 mm |
Width (B) | 18 mm |
Product weight (per item) | 222.000 g |
Last viewed
Bar handle, stainless steel
Shim ring DIN 988, steel, plain
Hexagon head bolt with full thread for pressure container construction (PED) ISO 4017, steel 25CrMo4, plain
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Hexagon nut with fine thread DIN 934, steel I10I, plain
Hexagon nut with clamping piece (all-metal)
Brass, metric, EMC cable gland in accordance with EN 60423/EN 62444
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3768
Protective apron
Milling bit Ruko tungsten carbide milling bit type A cylinder (ZYAS) with spur cut TiCN