Tapered roller bearing FAG
Tapered roller bearings
TAPERED-ROLLBEAR-33021
Register now and access more than 125,000 products
The tapered roller bearing can support high radial and axial loads in a single direction. Not self-retaining.
The counter-alignment needed by the bearing is typically implemented using a second, mirrored tapered roller bearing.
- A:modified inner structure
- B:enlarged contact angle
- X:external dimensions in accordance with international standards
 | |
Internal diameter (d) | 105 mm |
Outer diameter (D) | 160 mm |
Width (B) | 43 mm |
Product weight (per item) | 3040.000 g |
Datasheets(X)
Last viewed
Cross cabinet hinge, heavy-duty
Wedge lock washer W.TEC, narrow shape
Threaded fitting
Intermediate stand crash protection
Clamping pin/clamping sleeve
System workbench 1500 mm with 1 workbench foot and drawer undercounter cabinet 8.6
ASSY® 4 RCS fittings screw Steel zinc plated full thread raised countersunk head
Low-cut safety shoes, S1
90° HSCo WN type RN TiAlN NC spotting drill bit
EASYLUX wired capacitive sensor
