Tapping screw, countersunk head
ISO 7050 steel zinc-nickel black cs head H shape C
SCR-CS-ISO7050-C-H1-(ZNBHL)-2,2X6,5
Register now and access more than 125,000 products
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc nickel black |
RoHS-compliant | Yes |
Form | C |
Nominal diameter (d1) | 2.2 mm |
Length (l1) | 6.5 mm |
Head diameter (dk) | 3.50 mm |
Head height (k1) | 1.10 mm |
Internal drive | H1 |
Drive type | H |
Head type | Countersunk head |
Thread type | Self-tapping screw thread |
Shape of tip | C |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
Flat paintbrush For solvent-based lacquer and paint systems
Low-cut safety shoes S1P
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
Connector, pneumatic
Safety boots, S3
Castellated nut, low profile DIN 979, steel 05, plain
PE backfill sealant
Low head hexagon head bolt in hygienic design
Split pin DIN 94, steel, plain
Hexagon socket set screw with ring cutter