Tapping screw, raised countersunk head ISO 7051 shape C, steel, zinc nickel (ZNSHL)
ISO 7051 steel zinc nickel H shape C
SCR-RSDCS-ISO7051-C-H2-(ZNSHL)-4,2X16
Register now and access more than 125,000 products
Datasheets(X)
Standards | ISO 7051 |
Material | Steel |
Surface | Zinc nickel silver |
Form | C |
Head type | Raised countersunk head |
Drive type | H |
Internal drive | H2 |
Nominal diameter (d1) | 4.2 mm |
Head diameter (dk) | 8.4 mm |
Length (l1) | 16 mm |
Head height (k1) | 2.6 mm |
Design | 0 - not applicable |
Head details | 0 - not applicable |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Thread form | 0 - not applicable |
Pitch | 1.4 mm |
Product class | A |
RoHS-compliant | Yes |
Approval | 0 - not applicable |
Construction product | 0 - not applicable |
Regulated area | 0 - not applicable |
Declaration of performance (EU-CPR) | No |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
Hose pack HD For Recycle Guard
Double open-end wrench, ultra-thin
Marking/expander tool with hand guard
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Pan Head screw with hexalobular head ISO 14583, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Hexagonal bolt with shank
Wire nail DIN 1151 zinc-plated steel (ZN)
Self-tapping thread insert with cutting slot
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain