Tapping screw, raised countersunk head ISO 14587, zinc plated steel
ISO 14587 steel zinc plated TX type C
SCR-RSDCS-ISO14587-C-TX10-(A2K)-2,9X13
Register now and access more than 125,000 products
Standards | ISO 14587 |
Material | Steel |
Surface | Zinc plated |
Form | C |
Head type | Raised countersunk head |
Drive type | Internal TX |
Internal drive | TX10 |
Nominal diameter (d1) | 2.9 mm |
Head diameter (dk) | 5.5 mm |
Length (l1) | 13 mm |
Head height (k1) | 1.7 mm |
Thread type | Self-tapping screw thread |
Pitch | 1.1 mm |
Product class | A |
RoHS-compliant | Yes |
Declaration of performance (EU-CPR) | No |
Datasheets(X)
Last viewed
1/4 inch bit ratchet
Plus Quadro-L hammer drill bit
GEFU® thread-rolling screw with Taptite 2000® thread, countersunk head and hexalobular drive
Wing repair washer assortment 1400 pieces
Work T-shirt HAKRO 281 T-shirt MIKRALINAR®
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Work poloshirt HAKRO 800 polo shirt
DUO wire end ferrule with plastic sleeve box, type 1
Low-cut safety shoes, S1P Steitz DX 741 SF
Cordless multi cutter Fein AMM 500
