Tar remover

Name: Tar remover
Brand: Würth
SKU: 089026 005

Remover of tar
TARREM-5LTR

Art.-no. 089026 005

EAN 4046778980959

All versions

Similar products

Prices for customers after login

Tar remover

Art.-no. 089026 005

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Effortlessly removes tar, oil, and splashes of underbody seal and cavity sealant from paint and chrome

Strong solvent for removing stubborn dirt

Easy rinsing thanks to emulsifying effect

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Tar remover has good cleaning properties thanks to its optimised composition of solvents and is used to remove the substances mentioned above and other impurities from vehicles and machines of all types.

Instructions

Spray on directly or apply to the surface to be treated with a saturated cloth, allow to take effect briefly and remove with a cloth or soft sponge.

Contents	5000 ml
Product weight (per item)	4395 g
Container	Canister
Chemical basis	Mineral oil
Smell/fragrance	Characteristic
Colour	Colourless
Min. flashing point	30 °C
Density/conditions	0.8 g/cm³ / at 20°C
Shelf life from production/conditions	24 Month / at 20°C
AOX-free	Yes
Bio-degradable	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 4

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 5

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.