Tension anchor V plus - TENSANC-VPLUS-560X90X65X4,0MM

Tension anchor V plus

Name: Tension anchor V plus
Brand: Würth
SKU: 5392000257

Tension anchor, V plus
TENSANC-VPLUS-560X90X65X4,0MM

Art.-no. 5392000257

EAN 4053479553887

All versions

Similar products

Prices for customers after login

Tension anchor V plus

Art.-no. 5392000257

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

Single-piece, high-load carrying tension anchor system for anchoring bases in wood, steel or concrete substructures.

Extremely high load-carrying capacities

Large base plate for optimised force initiation into the floor

Indirect mounting (max. 26 mm) via an intermediate layer (e.g. OSB)

Extra-long back panel for optimum placing of the number of screws/nails required, while complying with the requisite edging on the wooden stand

Sheet metal hot-dip galvanised on both sides (DD11+ Z 275) in line with EN 10025-2:2004 3.0 or 4.0 mm in thickness

Application in utilisation classes 1 and 2 in line with EN 1995:2013

Proof of Performance

CE labelling as per European Technical Approval ETA-14/0274

Notice

Dowel mounting: The respective basic conditions of the applicable anchor approval must be observed.

Available work documents:

Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.

Available work documents:

Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.

Notes:

CE labelling as per European Technical Approval ETA-14/0274

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Base anchoring of supports, roof beams, timber frame constructions or solid wood elements

Instructions

Suitable fasteners:

Comb/ribbed nails in line with EN 14592: 4.0 x 40 to 100mm

ASSY 3.0 joist hanger bolt in accordance with ETA-11/0190 or EN 14592

Bolts in line with manufacturers' specifications

Recommended dowels for anchoring in concrete: W-BS; W-FAZ; W-VIZ; WIT-VM 250; WIT-UH 300


Width x height x depth	65 x 560 x 90 mm
Baseplate thickness	8 mm
Thickness	4 mm
Hole diameter in subcarrier nJ/main carrier nH	5.1 / 18 mm
Number of holes in subcarrier nJ + main carrier nH	57 + 1 PCS
Weight	1540 g
Approval	ETA-14/0274
Distance between support and centre of hole	35 mm
Min. handle width	60 mm
Recommended type of anchor	W-VM250; W-FAZ
Material	Sheet steel
Material designation	DD11
Material standard	EN 10025- 2:2004
Surface	Hot dip galvanized

Characteristic load-bearing capacity and design value of the load-bearing capacity ("short") in load case F1 for Würth tension anchor Vplus according to ETA 14/0274
Type	Format in mm	U-washer/base plate	KLED	Load-bearing capacity per fastener (anchor nail or joist hanger screw in mm) in kN							Load-bearing capacity Steel in kN	Coefficient kt
Vplus	Format in mm	U-washer/base plate	KLED		4x40	4x50	4x60	5x35	5x40	5x50	Load-bearing capacity Steel in kN	Coefficient kt
	Lx90x65x3.0	Without specification	char.	F_VM,Rk =	1,59	1,87	1,93	1,88	2,10	2,29	F_S,Rk =36.2	1,0
	Lx90x65x3.0	Without specification	Short	F_VM,Rd =	1,10	1,30	1,34	1,30	1,46	1,59	F_S,Rd =29.0	1,0
	Lx90x65x4.0	Base plate 10 mm	char.	F_VM,Rk =	1,56	1,87	1,93	1,88	2,10	2,29	F_S,Rk =48.3	1,0
	Lx90x65x4.0	Base plate 10 mm	Short	F_VM,Rd =	1,08	1,30	1,34	1,30	1,46	1,59	F_S,Rd =38.6	1,0
Tensile force in anchor bolt: F_B,Ed = k_t x F_Ed

Tension anchor connection - softwood C24 with 15 mm OSB as intermediate layer
Type	Format in mm	U-washer/base plate	KLED	Load-bearing capacity per fastener (anchor nail or joist hanger screw in mm) in kN							Load-bearing capacity Steel in kN	Coefficient kt
Vplus	Format in mm	U-washer/base plate	KLED		4x40	4x50	4x60	5x35	5x40	5x50	Load-bearing capacity Steel in kN	Coefficient kt
	Lx90x65x3.0	Without specification	char.	F_VM,Rk =	2,03	2,09	2,18	2,08	2,23	2,38	F_S,Rk =36.2	1,0
	Lx90x65x3.0	Without specification	Short	F_VM,Rd =	1,41	1,45	1,51	1,44	1,54	1,65	F_S,Rd =29.0	1,0
	Lx90x65x4.0	Without specification	char.	F_VM,Rk =	2,00	2,08	2,18	2,07	2,22	2,37	F_S,Rk =48.3	1,0
	Lx90x65x4.0	Without specification	Short	F_VM,Rd =	1,38	1,44	1,51	1,43	1,53	1,64	F_S,Rd =38.6	1,0
Tensile force in anchor bolt: F_B,Ed = k_t x F_Ed

Tension anchor connection - softwood C24 with 16 mm chipboard as intermediate layer
Type	Format in mm	U-washer/base plate	KLED	Load-bearing capacity per fastener (anchor nail or joist hanger screw in mm) in kN							Load-bearing capacity Steel in kN	Coefficient kt
Vplus	Format in mm	U-washer/base plate	KLED		4x40	4x50	4x60	5x35	5x40	5x50	Load-bearing capacity Steel in kN	Coefficient kt
	Lx90x65x3.0	Without specification	char.	F_VM,Rk =	1,97	2,06	2,15	2,03	2,18	2,33	F_S,Rk =36.2	1,0
	Lx90x65x3.0	Without specification	Short	F_VM,Rd =	1,37	1,43	1,49	1,40	1,51	1,61	F_S,Rd =29.0	1,0
	Lx90x65x4.0	Without specification	char.	F_VM,Rk =	1,95	2,05	2,15	2,01	2,16	2,31	F_S,Rk =48.3	1,0
	Lx90x65x4.0	Without specification	Short	F_VM,Rd =	1,35	1,42	1,49	1,39	1,50	1,60	F_S,Rd =38.6	1,0
Tensile force in anchor bolt: F_B,Ed = k_t x F_Ed

Required number of fasteners for tension anchors Vplus Lx90x65x3.0 depending on the connection of tensile load FEd to softwood C24
F_Ed in kN	Würth anchor nail in mm Load-bearing capacity class 3 4x40 4x50 4x60 4x75 4x100					ASSY 3.0 joist hanger screw in mm ETA-11/0190 5x35 5x40 5x50 5x60 5x70
4	4	4	3	3	3	4	3	3	3	3
5	5	4	4	4	4	4	4	4	3	3
6	6	5	5	5	5	5	5	4	4	4
7	7	6	6	5	5	6	5	5	5	4
8	8	7	6	6	6	7	6	6	5	5
9	9	7	7	7	7	7	7	6	6	6
Calculation of the load-bearing capacities of fasteners according to DIN EN 1995-1-1 as for thick steel sheets. The required minimum distances between the fasteners must be observed! The specifications are valid for a characteristic density ρ_k = 350 kg/m³ and for k_mod = 0.9.

Required number of fasteners for tension anchors Vplus Lx90x65x4.0 depending on the connection of tensile load FEd to softwood C24
F_Ed in kN	Würth anchor nail in mm Load-bearing capacity class 3 4x40 4x50 4x60 4x75 4x100					ASSY 3.0 joist hanger screw in mm ETA-11/0190 5x35 5x40 5x50 5x60 5x70
4	4	4	3	3	3	4	3	3	3	3
5	5	4	4	4	4	4	4	4	3	3
6	6	5	5	5	5	5	5	4	4	4
7	7	6	6	5	5	6	5	5	5	4
8	8	7	6	6	6	7	6	6	5	5
9	9	7	7	7	7	7	7	6	6	6
10	10	8	8	8	8	8	7	7	6	6
11	10	9	9	8	8	9	8	7	7	7
Calculation of the load-bearing capacities of fasteners according to DIN EN 1995-1-1 as for thick steel sheets. The required minimum distances between the fasteners must be observed! The specifications are valid for a characteristic density ρ_k = 350 kg/m³ and for k_mod = 0.9.

Overview of load capacity tables for tension anchors HTA and VPlus
Characteristic load-bearing capacity and design value of the load-bearing capacity ("short") in load case F1 for Würth tension anchor HTA and Vplus according to ETA 14/0274
Tension anchor connection HTA and Vplus - without intermediate layer
Type	Format in mm	U-washer/base plate	KLED	Load-bearing capacity per fastener (anchor nail or joist hanger screw in mm) in kN							Load-bearing capacity steel in kN		Coefficient k_t^₍₁₎
Type	Format in mm	U-washer/base plate	KLED		4x40	4x50	4x60	5x35	5x40	5x50	Load-bearing capacity steel in kN		Coefficient k_t^₍₁₎
HTA	Lx60x60x3.0	U-washer 30x3 mm	char.	FVM,Rk =	1,68	1,99	2,15	1,92	2,15	2,29	FS,Rk =	35	1,1
	Lx60x60x3.0	U-washer 30x3 mm	Short	FVM,Rd =	1,16	1,38	1,49	1,33	1,49	1,59	FS,Rd =	28	1,1
	Lx60x60x3.0	Base plate 10 mm	char.	FVM,Rk =	1,59	1,87	1,93	1,88	2,10	2,29	FS,Rk =	45	1,1
	Lx60x60x3.0	Base plate 10 mm	Short	FVM,Rd =	1,10	1,30	1,34	1,30	1,46	1,59	FS,Rd =	36	1,1
	Lx80x80x3.0	U-washer 37x3 mm	char.	FVM,Rk =	1,68	1,99	2,15	1,92	2,15	2,29	FS,Rk =	60	1,1
	Lx80x80x3.0	Base plate 20 mm	Short	FVM,Rd =	1,16	1,38	1,49	1,33	1,49	1,59	FS,Rd =	48	1,1
Vplus	Lx90x65x3.0	Without specification	char.	F_VM,Rk =	1,68	1,99	2,15	1,92	2,15	2,29	FS,Rk =	36,2	1,0
	Lx90x65x3.0	Without specification	Short	F_VM,Rk =	1,16	1,38	1,49	1,33	1,49	1,59	FS,Rd =	29	1,0
	Lx90x65x4.0	Without specification	char.	F_VM,Rk =	1,56	1,87	1,93	1,85	2,07	2,29	FS,Rk =	48,3	1,0
	Lx90x65x4.0	Without specification	Short	F_VM,Rk =	1,08	1,30	1,34	1,28	1,43	1,59	FS,Rd =	38,6	1,0
Tensile force in anchor bolt: F_B,Ed = k_t x F_Ed
Notes: Würth anchor nails or ASSY 3.0 joist hanger screws according to EN 14592 or ETA 11/0190 are to be used as fasteners. The specified load-bearing capacities are for softwood with a characteristic density of ρk ≥ 350 kg/m³. Design value of the load-bearing capacity of a fastener: FVM,Rd = kmod/gM x F1,Rk with gM = 1.3 Design value of the steel load-bearing capacity of the tension anchor: FS,Rd = FS,Rk/gM2 with gM2 = 1.25 Design value of the total load-bearing capacity: F1,Rd = min {n × FVM,Rd; FS,Rd} with n = number of nails The design value of the tensile force in the anchor bolt FB,Ed must be calculated using the design value of the tensile force of a tension anchor FEd. The minimum distances between fasteners for sheet steel-wood connections according to EN 1995-1-1 must be observed. (1) Design values for anchors, see table of contents These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Overview of load capacity tables for tension anchors HTA and VPlus
	Required number of fasteners for tension anchors Vplus Lx90x65x4.0 depending on the connection of tensile load FEd to softwood C24
F_Ed	Würth anchor nail in mm load-bearing capacity class 3					ASSY 3.0 joist hanger screw in mm ETA-11/0190
in kN	4x40	4x50	4x60	4x75	4x100	5x35
Required number of fasteners for Würth tension anchors HTA and Vplus on softwood C24 according to ETA 14/0274 and k _mod of 0.9
	Required number of fasteners for tension anchors Vplus Lx90x65x3.0, HTA Lx60x60x3.0 and HTA Lx80x80x3.0 depending on the connection of tensile load FEd to softwood C24
F_Ed	Würth anchor nail in mm, load-bearing capacity class 3					ASSY 3.0 joist hanger screw in mm ETA-11/0190
in kN	4x40	4x50	4x60	4x75	4x100	5x35	5x40	5x50	5x60	5x70
13	12	11	10	10	10	11	9	9	8	8
14	13	11	11	10	10	11	10	9	9	8
15	14	12	12	11	11	12	11	10	9	9
4	4	4	3	3	3	4	3	3	3	3
5	5	4	4	4	4	4	4	4	3	3
6	6	5	5	5	5	5	5	4	4	4
7	7	6	6	5	5	6	5	5	5	4
8	8	7	6	6	6	7	6	6	5	5
9	9	7	7	7	7	8	7	6	6	6
10	10	8	8	8	8	8	7	7	6	6
11	11	9	9	8	8	9	8	7	7	7
12	12	10	9	9	9	10	9	8	8	7
13	12	11	10	10	10	11	10	9	8	8
14	13	11	11	10	10	11	10	9	9	8
15	14	12	12	11	11	12	11	10	9	9
4	4	4	3	3	3	4	3	3	3	3
5	5	4	4	4	4	4	4	4	3	3
6	6	5	5	5	5	5	5	4	4	4
7	7	6	6	5	5	6	5	5	5	4
8	8	7	6	6	6	7	6	6	5	5
9	9	7	7	7	7	7	7	6	6	6
10	10	8	8	8	8	8	7	7	6	6
11	10	9	9	8	8	9	8	7	7	7
12	11	10	9	9	9	10	9	8	8	7
Calculation of the load-bearing capacities of fasteners according to DIN EN 1995-1-1 as for thick steel sheets. The required minimum distances between the fasteners must be observed! The specifications are valid for a characteristic density ρ_k = 350 kg/m³ and for k_mod = 0.9.
NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.