Tensioning washer For screw connections DIN 6796, spring steel C60, mechanically applied zinc coating
DIN 6796 spring ST C60 mech. app. zinc coating
DISK-TENS-DIN6796-(MZP)-D17,0
Register now and access more than 125,000 products
Spring washers are co-stressed elements that use setting to counteract the loosening of screwed connections. This is achieved by maintaining the pre-tensioning force in the connection through a high degree of resiliency
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw thread | M16 |
Internal diameter (d1) | 17 mm |
Outer diameter (d2) | 39 mm |
Height (h1) | 5.25 mm |
Thickness (s1) | 4 mm |
Standards | DIN 6796 |
Material | Spring steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Suitable for | Screw connections, property class 8.8 and 10.9 |
Locking function | Embedding locking device |
Last viewed
Hexagonal bolt
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
S1 safety boot Elten Anthony Mid ESD
pias® drilling screw, raised countersunk head with AW drive
Spare direct jet spray head With extension tube for REFILLO® cans
Rubber modules, small
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Screw for ISO S clamping system
System bolt For system connector SV 20 E
Hexagonal bolt with thread up to the head ISO 4017, brass, plain