Thin sheet metal screw With hexagon head DBS
Thin sheet metal screw DBS steel zinc plated
SCR-DBS-WS8-(A3K)-4,8X20
ZEBRA
Register now and access more than 125,000 products
Advantages of the tip geometry:
- No pre-drilling
- Shingless screws due to material displacement
- Higher extraction values due to the tension of the thread forming
Suitable for component combinations tI / tII according to approval ETA-10/0184
- Steel / Steel - for ∅ 4,8 mm
In dry interior applications
Zinc-plated drilling screws may only be used where dampness is not to be expected. For connection elements with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Hexagon |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | Tip |
Underground | Steel |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 20 mm |
Head diameter (dk) | 10.5 mm |
Head height (k1) | 4.5 mm |
External drive (s1) | WS8 |
Max. material thickness to be drilled through (metal) | 2.5 mm |
For max. substructure thickness | 1.25 mm |
Approval | ETA-10/0184 |
Last viewed
Rotary shaft sealing ring DIN 3760, plastic NBR, shape A
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with metallic sealing edge, shape B
3D corner seals, 20 mm
Dimple foam For ORSY® system case
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
LED contour light with flexible assembly housing 24V
Charger 12 volt AL 30-LI For rechargeable battery LI 10.8 volt and 12 volt
Hexagonal bolt with thread up to the head
Grooved taper-pin ISO 8744 steel plain
Workshop scheduler, three rows DIN A4