Thin sheet metal screw ventilation system construction with hexagon head DBS
Thin sheet metal screw DBS-LK steel zinc-plated hexagon
SCR-TSS-VD-SW7-(A3K)-4,0X13
Register now and access more than 125,000 products
Advantages of tip geometry:
- No pre-drilling
- Chip-free screwing through material displacement
- No need to clean the ventilation ducts of drilling chips
- Higher pull-out values due to the collar bead during thread forming
Zinc-plated steel drilling screws must only be used where dampness is not to be expected.
Test report on air tightness from the European Test Centre for Domestic Ventilation Equipment, Dortmund (Europäisches Testzentrum für Wohnungslüftungsgeräte e.V. - TZWL), test no.: M.78.06.375
Datasheets(X)
- Screw connections of ventilation ducts and pipes
- Fixing of e.g. ventilation duct brackets and suspended items on ventilation ducts
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Hexagon head with collar |
Drive type | Outer hexagon |
Thread type | A |
Thread design | Full thread |
Shape of tip | Pinpoint |
Nominal diameter (d1) | 4 mm |
Length (l1) | 13 mm |
Head height (k1) | 4.10 mm |
External drive (s1) | WS7 |
Last viewed
Slotted screwdriver with wooden handle
Nylon anchor with collar W-MR
Basic sweatshirt
Hand-held stapler HT 53 High impact strength for thin materials
Hexagon nut, low profile with fine thread DIN 439, A2 stainless steel, plain
Levelling foot set for system cabinet and system workbench
Engine turning unit With 2 gears
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-nickel-plated, silver (ZNSHL)
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)