Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Heat shrink hose in dispenser box 2:1
HSHRHOSE-BOX-RED-(9,5-4,8MM)
Register now and access more than 125,000 products
Dimensions of dispenser box: approx. 163 x 50 x 172 mm
Datasheets(X)
Colour | Red |
Diameter | 9.5 mm |
Diameter (shrunk) | 4.8 mm |
Sleeve-wall thickness when shrunk | 0.56 mm |
Dielectric strength | 20 kV/mm |
Min./max. shrinkage temperature | 90 to 200 °C |
Min./max. temperature conditions | -55 to 125 °C |
Material | Polyolefin |
Flame-retardant | Yes |
Length | 5 m |
Last viewed
Washer DIN 1440, A4 stainless steel, plain, for bolt
Clip for Redoslide interior sliding door fitting, wood and aluminium front panel
Pipe cable lug with narrow flange
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Lambda sensor thread repair set Time-Sert
90° HSCo WN type RN TiAlN NC spotting drill bit
Taper-grooved dowel pin ISO 8745 steel plain
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain