Thin-walled heat-shrink hose Shrink rate 3:1, with internal adhesive
Heat shrink hose with internal adhesive
HSHRHOSE-ADH-GREY-L100MM-(12,0-4,0)
Register now and access more than 125,000 products
Flame-retardant (not adhesive)
Datasheets(X)
Moisture-resistant insulation of electrical connections, connectors, etc.
Colour | Grey |
Diameter | 12.0 mm |
Diameter (shrunk) | 4.0 mm |
Length | 100 mm |
Sleeve-wall thickness when shrunk | 1.35 mm |
Dielectric strength | 20 kV/mm |
Min./max. temperature conditions | -55 to 85 °C |
Min. shrinkage temperature | 120 °C |
Material | Polyolefin |
Flame-retardant | Yes |
Last viewed
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)
Washer ISO 7089 steel 200 HV zinc-plated thick-layer passivated with sealing (ZSM)
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Divider OrgaAer
Safety boots, S3
Wire cable barrel terminal with nut, left-hand thread
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Grooved taper-pin ISO 8744 steel plain
Threaded rod DIN 976, A2-70 stainless steel, shape A
Cut protection glove