Thread adapter For pipe clamps
Reducing nipple, thread metric/inch
REDNPL-(A2K)-(ID-1/2")-(ED-M10)-WS34
Register now and access more than 125,000 products
Our products certified as Cradle to Cradle Certified® are resource-conserving and environmentally compatible. The standard assesses the safety, recyclability and pollutant content of materials in the final product. The focus here is on conserving resources, for example, by using recycled material in the manufacturing process.
Suitable for Würth pipe clamps with M8/M10 connecting thread. For other M10 pipes, it is important to check that the M10 thread and the adapter can be screwed far enough together.
Datasheets(X)
Threaded tube ½-in on M12 pipe clamp, not suitable for dynamic connections!
 | |
Length (L) | 30 mm |
Connection thread (IG) | IT 1/2 inch |
Outlet thread (AG) | ET M10 |
Male thread length (LG) | 10 mm |
Width across flats (SW) | 34 mm |
Surface | Zinc plated |
Material | Steel |
Min. strength range | 400 N/mm² |
Product weight (per item) | 122.000 g |
Sustainability | Resources, Pollutants / Emissions |
Last viewed
Turn signal 12 V/24 V
File handle
Tool board
Thermoset cross handle with male thread
O-ring, metric
HPC Speedcut 4.0 Universal end mill, extra long XL, optional, four blades, uneven angle of twist gradient, HA shank
Low-cut safety shoes, S1P
Banjo bolt DIN 7643, steel, zinc-nickel silver-plated (ZNSHL), short version
Low-cut safety shoes, S3
Seaming pliers, curved 45 degrees